Here are printing instructions:

Don't shrink the image any, try to set your margins as close to zero as 
possible.  Chances are most of the image will be printed on 1 page, with 
3 extra pages of the various edges of the image.  The bottom of the Shadow 
character's legs will be covered by the playfield plastic. The bottom of 
the Jackpot circles should be about 4.75" inches from the bottom.  Jackpot circles should be about 1" in diameter.

>From the left hand edge, the center of the jackpot circles should be
about 4", 6.5", and 9" inches away.

Use a straight edge and a sharpie to color the left and right hand
edges of the page black, no need to worry about the top and bottom
edges.  Place X shaped slits on each of the jackpot circles.

Unscrew the slanted battlefield ramp, remove the three flasher bulbs &
domes, upper right playfield plastic, and the two screws in the bracket
in the corner.  Press on the backpanel and slide the paper inbetween the
bracket and the wood.  Line up the center Jackpot circle with the center
flasher.  You will need to shift the paper around until you can mount
the center flasher dome even with the Jackpot circle edges.  On my
machine I was only able to put the top mounting screws in and have
everything line up.

 
-James